Calibrating an Insteon Thermostat

Temperature Calibration

Note: Use a calibrated temperature or humidity source when adjusting Insteon Thermostat
1) Press and hold the Program button (The display will go blank). Tap Time/Sensor to enter Temperature Calibration Mode.
2) Tap Mode to step between temperature calibration and humidity calibration.
3) Tap Up or Down arrows to adjust the displayed temperature to match the calibrated source.

Humidity Calibration

1) Once in Setup Mode for temperature calibration (step 1 above), tap Mode button to step between temperature calibration and humidity calibration.
2) Press the Up or Down arrow to select the current humidity level.
3) Press Program to exit calibration mode.
 

Wireless Thermostat Setup

Guides and Manuals | Going Further | Product Registration

Guides and Manuals

Quick Start Guide

Owner's Manual

---

Going Further

Wired Thermostat for Heat Pumps Setup

Getting Started | Guides and Manuals | Going Further | Product Registration

Getting Started

Before installing Insteon Thermostat for Heat Pumps, ensure your system is compatible.

Learn More →

Turn off power and remove your old thermostat's cover.

Take a picture of your thermostat's wires and apply the optional wire labels. Carefully remove the old mounting bracket.

Install Insteon Thermostat for Heat Pumps and connect the wires. Close the cover and turn on power.

Wire colors may vary. Not all wires may be used. Match your wires to the labels printed on Insteon Thermostat for Heat Pumps.

Follow the on-screen instructions in the Insteon app to add Insteon Thermostat for Heat Pumps.

When prompted, press and hold the set button until Thermostat double-beeps.

---

Guides and Manuals

Quick Start Guide

Owner's Manual

---

Going Further

Wired Thermostat Setup

Guides and Manuals | Going Further | Product Registration

Guides and Manuals

Quick Start Guide

Owner's Manual

---

Going Further