Dimmer Keypad Setup

The content of this document applies to both Insteon Dimmer Keypad (6-Button) and Insteon Dimmer Keypad (8-Button).

Getting Started

step-1.png
Turn off power at the service panel and remove the existing wall switch.
step-2.png

Unfold all of the wires from the junction box. Separate the black wires and cap them with wire nuts.

If your switch's wires do not match the diagram, consult the additional wiring diagrams available below.

step-3.png
Turn on power and use a voltage detector to identify the live wire; this is your line wire.
 
step-4.png
Turn off power and connect the corresponding wires from the junction box with the Insteon Wall Keypad and cap them with wire nuts.
step-5.png
Install Insteon Wall Keypad, attach the wall plate and turn on power.
step-6.png

Follow the on-screen instructions in the Insteon app to add Dimmer Keypad.


Bulb Compatability

 
bulb-types.png

Only use dimmable bulbs with Insteon Dimmer Keypad

 

Guides and Manuals

Quick Start Guides

Owner's Manuals